How To Flash Gionee P5W with Latest CM2 Tool Free

Today I’m going to guide you on how to flash Gionee p5w with MTK CM2 tool. Before we start I would like to explain why we need to flash this phone. Here are the reasons why we need to flash it. First, if the phone is freeze or stuck on the logo, 2nd to remove the FRP lock and 3rd any related software issues. If you have these kinds of issues you need to flash the phone with stock ROM or firmware to fix the phone issues. So, let’s begin…

How to flash gionee p5w

Files needed:

  • P5w Stock Firmware
  • MTK CM2(Chinese miracle)
  • Gionee USB driver

Everything needed above can found at the bottom of this post so make sure to check it below.

How To Flash Gionee P5w Using The Free Tool?

  1. First, download all files needed on the links below.
  2. Then, install MTK CM2.
  3. After that install Gionee p5w USB driver.
  4. Now, open CM2 or Chinese miracle II.
  5. Then click the flashing tab.
  6. Now you will something like this image below.
    Gionee P5W FRP Chinese miracle
  7. Choose the scatter and look for the firmware(Make sure it’s extracted already).
  8. Then for “MT6580_Android_scatter.txt” the same as the image above.
  9. And for the settings follow the image above.
  10. Click flash and wait until the bar is full.

The p5w firmware is 100% tested many times without any issue but if you experience some issues. You can use the comment below and read the tips to avoid issues.

This sometimes occurs when the program is not fully erased. So you will need something to do to overpass the stuck logo. What you need to do to fix it is to perform a hard reset.  Here’s the easy step to do it hold the two-button “volume up and power on” then wait for recovery to show up then release. After that choose “wipe data/factory reset” then choose “yes”. After that, reboot the phone and it should be work as normal. 

The Phone Dead After Flash Solution Above Doesn’t Work?

That is why I added the optional firmware below if the first firmware doesn’t work you can program it with optional backup.  It’s rarely happened in my experience but most of them fixed after flashed with another firmware. Download the backup firmware from optional and then follow the guide step by step above as you did on the first step.  Once it’s done don’t forget to hard reset the phone in recovery mode to avoid hang on the logo.

Now, your phone is fully flashed and I hope it fixes your phone issues. Don’t forget to check the IMEI if it’s correct or not. If ever the IMEI is showing “null” or all zero “0”. You need to root the phone and use a chameleon IMEI generator or try it without rooting. If anything goes wrong or if the procedure of Gionee p5w after the flash stuck on the logo doesn’t work you can use the comment below. I will reply as soon as I’m online to give you another solution to fix your issue.

If anything goes wrong or if the procedure of Gionee p5w after the flash stuck on the logo doesn’t work you can use the comment below. I will reply as soon as I’m online to give you another solution to fix your issue. If everything works fine don’t hesitate to share it with other people that have the same issue. Spreading this to your friends and family will save their few bucks to pay for a service in the phone repair center. You can use any of the buttons below or copy the URL and share it with your friends.

Download links:

Optional firmware:

Share this?

Leave a Comment